2
2
SETUP BEFORE INSTALLATION
2.1
Check Accessories
Before the installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are included.
2.2
Open Device
This section is for intelligent analog speed dome, intelligent network speed dome, and intelligent
tracking speed dome.
Remove the package and then take out the device. Open the transparent cover and take out the
packing material EPE around the speed dome drive. Please remove the paster from the pedestal.
See Figure 2-1.
Figure 2-1
2.3
Initial Setup
The default setup is:
z
Address:
1
z
Baud rate: 9600
z
Parity:
None
z
120
Ω
resistance: OFF
