ICRA DJI RoboMaster AI Challenge AI Robot 2019, Руководство пользователя

Страница: 23 / 30

17
6. Powering On and Operating the Robot
6.1 Installing and Removing the Battery
The battery rack is in the middle of Robot chassis and in front of the gimbal. Vertically install the
battery into the battery rack when use the robot. The following figure shows the installing position:
6.2 Powering On/Off the Robot
After installing the battery to the battery rack, power on the Intelligent Flight Battery and turn on the
Power Switch of Robot (as shown above). The Power Switch is between the battery rack and the rear
armor and fixed on the battery rack. After powering on, Robot will have an initialization, during which
the HP displayed on the Light Indicator of the Main Controller Module of the Referee System
gradually increases from 0% to 90%. If it passes the initialization, the HP increases to 100%. The
remote controller is unavailable during the initialization.
6.3 Operation Mode
Robot supports two user operation modes:
1.
Manual : Operate Robot with the remote controller. This mode is simple, convenient, ready to use
upon power-on and most suitable for demonstration and debugging.