ICPDAS DL-100-E Скачать руководство пользователя

Страница: 10 / 77

DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual Version 1.1.3 Dec 2020

- 10 -

LED Indicators

The three LED indicators from left to right are:

PWR: green for normal operation.

Link: green for the Ethernet linked.

PoE: red for powered via PoE

DIP Switch

PoE/non-PoE Ethernet port

The Ethernet port can be used to connect to either a PoE switch or a non-PoE switch.

Installing a waterproof attachment on an RJ45 connector.

The DL-100-E series module is equipped with an RJ-45 waterproof connector that

ensures the device is able to withstand potential contaminants in dusty environments.

IP67 RJ45 Plug (4SASO-0001)

The functions are printed on the top beside the

SW1 DIP switch. All the 4

dip switches need be

turned to the off position for normal operation.

1. Reserved

2. FW Update: ON for updating firmware.

3. Reserved

4. INIT: ON for using the factory default settings

for communication

Содержание DL-100-E














































































Результаты поиска

Содержание DL-100-E

Отзывы:

Похожие инструкции для DL-100-E

Бренды по названию

Популярные бренды

ICPDAS DL-100-E, Руководство пользователя

Результаты поиска

Содержание DL-100-E

Отзывы:

Похожие инструкции для DL-100-E

Бренды по названию

Популярные бренды