Control and maintenance
Service Unit iMAT 33
7
Pos : 20 /Beko T ec hnis che D okumentati on/Übersc hriften/1/Kontr olle und Wartung @ 0\mod_1183637885371_15098.doc x @ 15106 @ 1 @ 1
4
Control and maintenance
Pos : 21 /Beko T ec hnis che D okumentati on/Sic her hei t/Gefahr Druc kl uft @ 0\mod_1184148143854_15098.doc x @ 15121 @ @ 1
Danger!
Compressed air!
Risk of serious injury or death through contact with quickly or suddenly escaping
compressed air or through bursting plant components or plant components which are
not secured.
Pos : 22 /Beko T ec hnis che D okumentati on/Sic her hei t/Maßnahmen Druc kluft BM @ 0\mod_1184148284291_15098.doc x @ 15123 @ @ 1
Measures:
•
Do not exceed the maximum operating pressure (see type plate).
•
Only carry out service measures when the system is pressure less.
•
Use pressure-resistant installation material only.
•
The feed pipe must be tubed firmly. Discharge pipe: short, fixed pressure hose onto pressure-resistant
pipe.
•
Make sure that persons or objects cannot be hit by condensate or escaping compressed air.
Pos : 23 /Beko T ec hnis che D okumentati on/Sic her hei t/Gefahr Netzs pannung 1 s/w @ 0\mod_1184148186948_15098.doc x @ 15122 @ @ 1
Danger!
Supply voltage!
There is the risk of an electric shock involving injury or death when coming into contact
with non-insulated components carrying supply voltage.
Pos : 24 /Beko T ec hnis che D okumentati on/Sic her hei t/Maßnahmen N etzs pannung BM 31U/32U/33U @ 7\mod_1390467197804_15098.doc x @ 38070 @ @ 1
Measures:
•
During electric installations, all regulations in force need to be adhered to (e.g. VDE 0100 / IEC 60364).
•
When the control unit is open, service and installation works must only be undertaken when the
system is deactivated.
•
The removed control unit has no IP degree of protection.
•
All types of electrical works must be carried out by authorized and qualified personnel only.
Pos : 25 /Beko T ec hnis che D okumentati on/Sic her hei t/Vorsic ht F ehlfunktion @ 0\mod_1214378096290_15098.doc x @ 15237 @ @ 1
Caution!
Malfunction during operation!
Through incorrect installation and poor maintenance, malfunction may occur at the
iMAT.
Condensate which is not discharged may cause damage to plants and in production
processes.
Pos : 26 /Beko T ec hnis che D okumentati on/Sic her hei t/Maßnahmen F ehl funkti onen BM @ 0\mod_1214378434025_15098.doc x @ 15238 @ @ 1
r
Measures:
•
Condensate drainage which is reliable in performance directly optimizes the compressed-air quality.
•
To prevent damage and breakdowns, it is imperative to observe the following:
•
Exact compliance with the specifications of use and with the performance parameters of the iMAT,
in connection with the case of application (see "Proper use" section)
•
Exact compliance with the installation- and operation instructions in this manual
•
Regular maintenance and control of the iMAT in accordance with the instructions in this operating
manual
Содержание Service Unit iMAT 33
Страница 2: ...2 Service Unit iMAT 33...
