31
LCD Panel Type
This setting is to select the type of LCD used with JUKI-3711P/3712.
User can select appropriate setting according to his LCD. But not all the
same type of LCD could be support. You could try it first and if it does not
work, the VGA BIOS have to be modified to fit the LCD.
1024 x 768 DSTN
640 x 480 MONO
640 x 480 DSTN
800 x 600 DSTN
640 x 480 12 BIT TFT
640 x 480 18 BIT TFT
1024 x 768 18BIT TFT
800 x 600 TFT
1024x768 36BIT TFT
32
4.7 CHIPSET FEATURES SETUP
This section allows you to configure the system based on the specific
features of the installed chipset. This chipset manages bus speeds and
access to system memory resources, such as DRAM and the external
cache. It also coordinates communications between the conventional
ISA bus and the PCI bus. It must be stated that these items should
never need to be altered. The default settings have been chosen
because they provide the best operating conditions for your system.
Bank 0/1 DRAM Timing
The first chipset settings deal with CPU access to dynamic random
access memory (DRAM). The default timings have been carefully
chosen and should only be altered if data is being lost. Such a scenario
might well occur if your system had mixed speed DRAM chips installed
so that greater delays may be required to preserve the integrity of the
data held in the slower memory chips.
The Choice: SDRAM 8/10ns, Normal, Medium, Fast, Turbo.
SDRAM Cycle Length
Select the number of SCLKs for an access cycle.
The Choice: 2, 3.
