38
There are four selections for Power Management, three of which have fixed
mode settings.
OPTION DESCRIPTION
Disabled (default)
No power management. Disables all four modes
Min. Power Saving
Minimum power management. Doze Mode = 1 hr. Standby
Mode = 1 hr., Suspend Mode = 1 hr., and HDD Power Down = 15
min.
Max. Power Saving
Maximum power management -- ONLY AVAILABLE FOR SL
CPU’s. Doze Mode = 1 min., Standby Mode = 1 min., Suspend
Mode = 1 min., and HDD Power Down = 1 min.
User Defined
Allows you to set each mode individually. When not disabled,
each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and disable.
Video Off In Suspend
When enabled, this feature allows the VGA adapter to operate in power saving
mode.
OPTION DESCRIPTION
NO
Monitor will remain on during power saving modes.
YES
Monitor blanked when the systems enters the Suspend mode.
Video Off Method
This determines the manner in which the monitor is blanked.
OPTION DESCRIPTION
V/H SYNC+Blank
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to the
video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support
Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video
Electronics Standards to select video power management
values.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
Options: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter
the Soft-Off state when the system has become unresponsive
Options: Delay 4 Sec, Instant-Off.
