30
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items
during POST.
Options: Enabled, Disabled.
First/Second/Third/Other Boot Device
The BIOS will attempt to load the operating system from the devices in the
specified sequence.
Options: Floppy, LS120, HDD0-3, SCSI, CDROM, ZIP100, LAN, Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive name
assignments.
Options: Enabled, Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
Options: Enabled, Disabled.
Boot Up NumLock Status
Select power on state for NumLock.
Options: On/Off.
Gate A20 Option
Select if chipset or keyboard controller should control GateA20.
OPTION DESCRIPTION
Normal
A pin in the keyboard controller controls GateA20
Fast
Lets chipset control GateA20
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller. When
enabled, the typematic rate and typematic delay can be selected.
Options: Enabled, Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a keystroke when you hold the key
down.
Options: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the
keystroke.
Options: 250, 500, 750, 1000.
