7
Communication
Test
Once the ZT-2000 I/O device has joined the ZigBee network, the signal
quality can be comfirmed by monitoring the status of the ZigBee Net LED
indicators. If the LED indicator shows a steady light, communication with the
ZT-2000 I/O device has been successfully established for data acquisition and
control.
ICP DAS also provides the “DCON Utility”, which can be used to simulate
DCON/Modbus communication. This software can also be used to verify the
device settings and ZigBee I/O functions.
※
The
DCON Utility
can be dowmload from:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
mulate I/O channel operating via using DCON Utility
Si
1.
Launch DCON Utility and select the correct COM Port settings to connect the
ZigBee Coordinator (ZT-2550/ZT-2570).
2.
Clicking “Search” button will start searching which ZT-2000 I/O device is in the
same ZigBee network.
3.
If there is any ZT-2000 I/O devices displayed, double clicking the “module
name” will start the I/O channels operated platform.
1
3
2
4
ICP
DAS,
ZT
‐
2000
DIO
SERIES
Quick
Start,
Version
1.2.1
Page
7
Copyright
©
2013
by
ICP
DAS
Co.,
Ltd.
All
Rights
Reserved.
