ICP DAS USA ZT-2053, Быстрый старт

Страница: 5 / 8

ICP DAS, ZT ‐ 2000 DIO SERIES Quick Start, Version 1.2.1
Page 5
Copyright
©
2013 by ICP DAS Co., Ltd. All Rights Reserved.
5
Start ‐ up ZT ‐ 2000 I/O Device
As the ZigBee network is controlled by the ZigBee coordinator, the
ZT-2550/ZT-2570 (ZigBee coordinator) must be configured first. Please refert to
documents shown below for full details of how to configure these devices.
Once configuration of the ZigBee coordinator has been completed. Set
the ”Pan ID” and the “RF Channel” values for the ZT-2000 I/O device to the same
values as the network, and then reboot the device. The module will
automatically start to function on the ZigBee network using the default protocol.
※
Documents
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-255x/
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-257x/
※
Configuration Utility
(Used to configure ZT-2000 I/O device Coordinator)
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/utility/