background image

 

VXC-114U/144U/144iU User’s Manual (Ver. 1.2, Mar.11, 2009)   -----41 

 

5.  Once the configuring has done successfully, type “

make

” to build all. 

Note: 

If you like to install files to system directory, the make install will do it for you. However, 

install files to system directory is not necessary for further operation. You will need the root 

privilege for that.

 

 

 

Script “

./ixcom.inst

” loads modules automatically. Script “

./ixcom.remove

” removes the 

loaded modules. The root privilege is required when installing or removing these kernel modules. 

 

3.5.3   Access to VXC Serial Port 

Script “

ixcom.inst

” will establish unused device major number dynamically and create 

correspond device node for access VXC serial port. 

Use proc-file /proc/icpdas/ixcom 

Load module ixcom 

# ./ixcom.inst 

IxCOM Installer 0.5.0 

Check kernel version... 2.6 

 

Use “

dmesg

” command to inspect the driver output message. 

ttySV1 at port d000 (irq = 11) is a 16C950/954 

ttySV2 at port d400 (irq = 11) is a 16C950/954 

ttySV3 at port d800 (irq = 11) is a 16C950/954 

Found ICPDAS VXC-114U series board(BusNo=0,DevNo=20) 

PCI: Found IRQ 11 for device 0000:00:14.0 

PCI: Sharing IRQ 11 with 0000:00:07.2 

PCI: Sharing IRQ 11 with 0000:00:14.1 

ttySV0 at port cc00 (irq = 11) is a 16C950/954 

ICPDAS VXC multi-serial card Serial driver version ixcom-0.8.1 (2007-08-21) 

dmesg 

……… 

……… 

 

The script “

ixcom.inst

” had loaded module into kernel and find a VXC card that have four 

Содержание VXC-112U
















































Отзывы: