VXC-114U/144U/144iU User’s Manual (Ver. 1.2, Mar.11, 2009) -----34
3.3.5 Configuration
If need, users can change the input buffer size (default is 4 KB for each port, up to 128 KB)
by setting the “SW FIFO” scroll-bar on the VxCard Utility. The utility’s short cut is placed on the
desktop after driver installed.
To change the COM port mappings (see
Section 2.2 COM Port Mappings and Board ID
),
users should restart the driver by rebooting the computer, or re-install the “
VXC Card
” hardware
in the “
Device Manager
” by un-install card and then scan new hardware.
3.3.6 Uninstallation
Before removing the card from your computer, it’s recommended to uninstall the device from
the ”
Device Manager
”. This removes unused hardware information from the database (registry)
of Windows.