Note:
When the hardware and software are well installed, the
driver turns off the LED on the card. If there is something error,
such as driver not work or COM port number conflicted, the LED
keeps lighting.
3.3.3 Configuration
If need, users can change the input buffer size (default is 4KB for each port,
up to 128KB) by setting the “SW FIFO” scroll-bar on the VxCard Utility. The
utility’s short cut is placed on the desktop after installation.
To change the COM port mappings, users should restart the driver by
rebooting the computer, or re-install the “
VXC Card
” hardware in the “
Device
Manager
” by un-install card and then scan new hardware.
3.3.4 Uninstallation
Before removing the card from your computer, it’s recommended to uninstall
the device from the ”
Device Manager
”. This removes unused hardware
information from the database (registry) of Windows.
VXC Cards User’s Manual (Ver. 1.1, 06/09.2005, pmh-012-01) -----21
