3.2.3 Configuration
If need, users can change the input buffer size (default is 4KB for each port,
up to 128KB) by setting the “SW FIFO” scroll-bar on the VxCard Utility.
To change the COM port mappings, users should restart the driver by
rebooting the computer, or launch a DOS box and run …
“
Net Stop VxCarSer
” command to stop the driver, then run
“
Net Start VxCarSer
” command to start the driver again.
Note:
When the hardware and software are well installed, the driver turns
off the LED on the card. If there is something error, such as driver not
work or COM port number conflicted, the LED keeps lighting.
3.2.4 Uninstallation
1. Select the “
Start / Settings / Control Panel
” and double-click the
“
Add/Remove Programs
” icon.
2. Select the “
VxCard Driver NT
” and click the “
Add/Remove
” button.
VXC Cards User’s Manual (Ver. 1.1, 06/09.2005, pmh-012-01) -----19
