3.3 Windows 2000
3.3.1 Installation
1. Launch the VxCard2K.exe to install the driver and register the related
information onto the system.
2. Power off the computer and install the VxCard into the PC.
3. Power on your computer, Windows 2000 should find the new card and load
the driver automatically. (Sometimes Win2K pops up few confirm dialog box,
just click “next” or “OK” to finish it.)
Note:
It’s recommended to install the software first, and then the
hardware. This reduces the configuration procedures.
3.3.2 Verification
To verify the installation, please complete the following steps:
1. Select
”
Start/Settings/Control Panel
” and double-click the ”
System
” icon.
2. Click the ”
Hardware
” tab and then click the ”
Device Manager
” button.
The VXC Card is listed under the ”
VXC Multi-port serial Card
” class, and
each Communications Port is listed under the ”
Ports (VxCard – RS-
232/422/485)
” class.
VXC Cards User’s Manual (Ver. 1.1, 06/09.2005, pmh-012-01) -----20
