6.2 Wire Connection of the CAN bus
Before starting the demos, the users should have at least one virtual slave
device. Here show the users how to connect the master and virtual slave
devices by CAN bus. The virtual slave devices should be connected to form
the serial type which is shown as Figure 6.2.1
Figure 6.2.1 Correct wire connection
The following wire connection is
wrong
which is shown as Figure 6.2.2
Figure 6.2.2 Wrong wire connection
PISO-DNS100(U) DeviceNet Slave API functions User’s Manual (Ver: 1.1) 2010/01/07
60
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru