background image

PISO-DNS100(U) DeviceNet Slave API functions User’s Manual (Ver: 1.1)      2010/01/07 

25 

3.    Driver Installation of the PISO-DNS100(U) 

The software Installation for DeviceNet application is demonstrated as the 

following descriptions. After finishing the procedure, the driver, demos, manual 

and Utility can be in your PC. For the advanced application, users can refer to 

the basic demo programs to develop the customized DeviceNet master 

application. 

The driver of PISO-DNS100(U) can be used in 2000/XP Windows 

environments. For these Windows operation systems, the recommended 

installation procedure is given as follows: 

Step 1:  Insert the companion CD into the CD-ROM driver and wait a few 

seconds until the installation program starts automatically. If it 

cannot be started automatically for some reason, please double-

click the file 

ICPDAS.EXE 

on this CD. The screenshot likes the 

following picture. Please click “CAN Series” item. 

 

 

Step 2:  After changing to the following picture, please click the “DeviceNet” 

item. 

 

 

ГК

 

Атлант

 

Инжиниринг

 – 

официальный

 

представитель

 

в

 

РФ

 

и

 

СНГ

 

+7(495)109-02-08 [email protected] www.bbrc.ru 

Содержание PISO-DNS100-D/T






































































Отзывы: