ICP DAS USA ISaGRAF VP-23W7, Руководство пользователя

Страница: 153 / 192

ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
10-5
10.3 Compiling an Application Program
When you have finished writing a program, you can build an application by the following steps.
1.
Remember to save at any time for safety.
2.
Then compile (Build) the project . The result is listed in the “Error List” windows at the bottom.
3.
You can find the execution file in
<Your C# .net Project folder> \bin\Release\ <project_name>.exe
Please copy this execution file to the ViewPAC ’s \System_Disk\ISaGRAF\ path to run it.
Note:
User may copy the C#.NET execution file to other path to run it but there should contain at least three
DLL files with it or it cannot run correctly.
For ex,
the project1.exe can run in the \Micro_SD\ path if there is three plus one file in it. The
“project1.exe” , “QuickerNet.dll” , “Quicker.dll” and “Mscorlib.dll” .
(The “QuickerNet.dll” , “Quicker.dll” and “Mscorlib.dll” can be copied from the ViewPAC ’s
“\System_disk\ISaGRAF\” path)
10.4 QuickerNET.DLL
This section we will focus on the description of the application example of QuickerNET.DLL functions.
There are some functions that can be used to R/W data from/to the ISaGRAF SoftLogic. The functions
of QuickerNET.DLL can be clarified as two groups as depicted as below:
1. Digital R/W Functions
2. Analog R/W Functions