ICP DAS USA I-7567, Руководство пользователя

Страница: 5 / 43

I-7567 USB/HART
Converter User’s Manual (Ver 1.3, 2015/10/30) ------------- 5

Support point-to-point or multi-drop HART mode.

Support connecting up to 15 HART slave devices.

Allow two HART masters.

Provide utility tool for module configuration and HART communication.

No external power supply (powered by USB)

Support firmware update via USB

Provide PWR / Tx / Rx indication LED
 4KV ESD Protection
 Selectable 250
Ω load resistor (1/4W)
1.2 Specifications
[ USB Spec. ]

Input port : USB (USB Type B)

Compatibility : USB 1.1 and 2.0 standard

Driver Supported : Windows 2000 / XP / Vista / 7 (32/64 bit)

Virtual COM Parameter : 1200 bps, O (odd parity), 8 (data bit), 1 (stop bit)
[ HART Spec. ]

Channel : 1

Connector : 2-pin screwed terminal-block

Network : Point to Point or Multi-drop

Baud Rate : 1200 bps

Frame : Short or Long

Operates as a HART Master and supports all HART commands

Support up to 15 HART slave devices

Isolation Voltage : 3KVdc on the HART side
[ Module Spec. ]

Dimensions : 108mm x 72mm x 35mm (H x W x D)

Operating temperature : -25 to 75
º
C (-13 to 167
º
F);

Storage temperature : -30 to 75
º
C (-22 to 167
º
F);

Humidity : 5 to 95%, non-condensing;

Indication LEDs :
PWR LED : Module power status