I-7567 USB/HART
Converter User’s Manual (Ver 1.3, 2015/10/30) ------------- 13
2.4 Init / Normal Jumper
Open the shell of I-7567 and there is a jumper (JP1) on the PCB of I-
7567 is used for firmware operation or firmware updating function of I-
7567 module.
Figure 2-7: Firmware Operation Figure 2-8
:
Firmware Updating
2.4.1 Firmware Update Mode
Please follow the below steps to complete the firmware update
process of I-7567.
(1) Set the jumper (JP1) to the firmware updating position like Figure 2-8
and reboot I-7567. Then I-7567 will work in the
“Firmware Update
Mode
”. In this mode, users can update the firmware of I-7567 module
via USB and the I-7567
will become a “USB Mass Storage” device like
Figure 2-9.
