I-7567 USB/HART
Converter User’s Manual (Ver 1.3, 2015/10/30) ------------- 12
2.3 Terminator Resistor Settings
The DIP switch is used to provide HART network with 250
Ω (1/4 W)
resistor. When it is
set to “On”, the resistor will connect to HART network.
Otherwise, it will disconnect the resistor from HART network. The default
position of the DIP switch is in
“On”.
Figure 2-5
:
Enable Internal Resistor. Figure 2-6
:
Disable Internal Resistor.
