ICP DAS USA I-7565M-FD Скачать руководство пользователя страница 22

Страница: 22 / 83

I-7565M-FD USB to CAN/CAN FD converter User Manual (version 1.0.0)

Page: 22

Step3: On the “CAN Port Enable” and “CAN1/CAN2 Baud Rate” location, user can set

the CAN Bus, and other prarameters. The detail functions of these parameters
are list below.

[CAN Port Enable]
“Port Enable” :

Enable/Disable the CAN1/CAN2 port.

“Bus Monitoring” :

Set the CAN port into bus monitoring mode. When setting the

CAN port into bus monitoring mode, the CAN port will just receive
CAN/CAN FD messages, no CAN Ack command be sent to the
CAN Bus.

“Non-ISO”:

Non-ISO operation. If this parameter is checked, the module uses
the CAN FD frame format as specified by the Bosch CAN FD
Specification V1.0. Otherwise, CAN FD frame format will follow
according to ISO11898-1.

[CAN Baudrate]
“Arbitration”:

CAN/CAN FD arbitration phase bit rate. Valid range: 10 kbps ~ 1000
kbps.

“Data Phase”:

CAN FD data phase bit rate. Valid range: 100 kbps ~ 3000 kbps

“SP”:

CAN/CAN FD arbitration/data phase bit rate sample point.
Suggested range: 75.00 ~ 87.50 %

Step4: Press the “Connect” buttom to start to use the above setting to send/receice

CAN/CAN FD messages.

Содержание I-7565M-FD



















































































Результаты поиска

Содержание I-7565M-FD

Отзывы:

Похожие инструкции для I-7565M-FD

Бренды по названию

Популярные бренды

ICP DAS USA I-7565M-FD, Информация о сервисе и использовании

Результаты поиска

Содержание I-7565M-FD

Отзывы:

Похожие инструкции для I-7565M-FD

Бренды по названию

Популярные бренды