ICP DAS USA I-7565, Руководство пользователя

Страница: 46 / 68

I-7530, I-7530-FT, I-7530A, I-7565
User’s Manual (Version 1.3, Apr/2015) -------- 46
4.10 P3SBCCCCCCCCMMMMMMMM [CHK]<CR>

Description: Change the CAN configuration of CAN Converter
module. This command will save the CAN
configuration parameter into SRAM. When the module
is rebooted, the CAN configuration will recover the
previous setting.

Syntax: P3SBCCCCCCCCMMMMMMMM[CHK]<CR>
P3 Command character
S CAN Specification 2.0A/2.0B
B CAN Baud rate
CCCCCCCC CAN filter acceptance code
MMMMMMM CAN filter acceptance mask
Table: CAN baud rate list
B Description
0 10K baud rate of CAN
1 20K baud rate of CAN
2 50K baud rate of CAN
3 100K baud rate of CAN
4 125K baud rate of CAN
5 250K baud rate of CAN, I-7530-FT does not support
6 500K baud rate of CAN, I-7530-FT does not support
7 800K baud rate of CAN, I-7530-FT does not support
8 1000K baud rate of CAN, I-7530-FT does not support
9 83.3K baud rate of CAN, I-7530-FT does not support

Response: A valid command will let the module to apply the CAN
configuration parameters.
Invalid command: ?<Error Code><CR>

Note:
It is necessary to enable the “Error Response” function in the CAN
Converter Utility, in order to receive Syntax and/or communication
error information at the host PC. This command does not support
user-defined CAN baud rate function. About CAN filter setting, please
refer to section 3.2.