I-7530, I-7530-FT, I-7530A, I-7565
User’s Manual (Version 1.3, Apr/2015) -------- 33
P0BBDSPAE[CHK]<CR>
*
Change the RS-232/RS-485/RS-
422/USB configuration and save it
into EEPROM.
P1B [CHK]<CR>
*
Change the CAN configuration and
save it into EEPROM.
P2BBDSPAE[CHK]<CR>
Change the RS-232/RS-485/RS-
422/USB configuration and those
parameter will not be saved.(only for
firmware version 3.00 or more)
P3SBCCCCCCCCMMMMMMMM
[CHK]<CR>
Change the CAN configuration and
those parameters will not be saved.
(only for firmware version 3.00 or
more)
RA[CHK]<CR>
Reboot the CAN Converter module.
* Note:
This command will write parameters into EEPROM and the
EEPROM is limited to 100,000 erase/write cycles.
Checksum algorithm:
The checksum [CHK] is 2-characters of the sum of the command
message, from first character to the character before <CR>. When
calculate checksum, the value of [CHK] is zero.
For example:
Command: Reboot the CAN Converter
module, “RA[CHK]<CR>”.
1.
Sum of the string = ‘R’ + ‘A’ = 52h + 41h = 93h.
2. Therefore the checksum is 93h and so [CHK]
=”93”.
3.
The command string with checksum =”RA93<CR>”.
