I-7530, I-7530-FT, I-7530A, I-7565
User’s Manual (Version 1.3, Apr/2015) -------- 30
Step 5. Click the CAN port of the CAN converter to set the CAN
parameters of the CAN converter.
Check the
“Active Port” and Click “Confirm” button to enable the CAN
port of the CAN converter. The parameters set here are not stored in the
EEPROM. If users would like to configure the other parameters expect the
CAN parameters, please use Configuration interface of the VxCAN Utility
to do that.
Step 6. Click
“Start” button
to open test interface.
The test interface is divided to two areas. One is for sending CAN
messages, and the other is for reception. If users want to send CAN
Send Area
Received Area
