ICP DAS USA CL-200 Series, Руководство пользователя

Страница: 134 / 221

A-10. CL-211 / CL-211-E DCON Command Sets - 134 -
Command Description
@AABEHH Enable/disable beep on alarm
HH in hex, , bit 0 for channel 0, bit 1 for channel 1, etc, for each bit,
0: disabled, 1: enabled
@AACH Clear all high latched analog inputs to the current values
@AACHN Clear channel high latched analog input to the current value
N = 0 for CO In 1ppm,
1 for PM2.5 in 1 ug/m3,
2 for relative humidity in 0.01%,
3 for temperature in 0.01°C,
4 for temperature in 0.01°F,
5 for dew point temperature in 0.01°C,
6 for dew point temperature in 0.01°F
@AACHCN Clear high latched alarm of a channel,
N = 0 for CO In 1ppm,
1 for PM2.5 in 1 ug/m3,
2 for relative humidity in 0.01%,
3 for temperature in 0.01°C,
4 for temperature in 0.01°F,
5 for dew point temperature in 0.01°C,
6 for dew point temperature in 0.01°F
@AACL Clear all low latched analog inputs to the current values
@AACLN Clear channel low latched analog input to the current value
N = 0 for CO In 1ppm,
1 for PM2.5 in 1 ug/m3,
2 for relative humidity in 0.01%,
3 for temperature in 0.01°C,
4 for temperature in 0.01°F,
5 for dew point temperature in 0.01°C,
6 for dew point temperature in 0.01°F
@AACLCN Clear low latched alarm of a channel,
N = 2 for relative humidity,
3 for temperature in 0.01°C,
4 for temperature in 0.01°F,
5 for dew point temperature in 0.01°C,
6 for dew point temperature in 0.01°F