ALX-9000 (Linux based PAC) User Manual version 1.0.0 Page: 17
Copyright © 2024 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
●
ttyS0 (2-wire RS-485)
Note
: 16C550 compatible
Port Type
: Terminals
Baud Rate
: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 bps
Data Bits
: 5, 6, 7, 8
Parity
: None, Even, Odd, Mark (Always 1), Space (Always 0)
Stop Bits
: 1, 2
FIFO
: 128 bytes
●
ttyS1 (RS-232/RS-485)
The ttyS1 port is a 9-pins RS-232/RS-485 connector that can be configured as either RS-232 or
RS-485, that only can select one at a time and its configuration depends on the pin connections as
follows:
RS-232
(RXD, TXD, RTS, CTS and GND)
RS-485
(Data+ and Data-)
There is no software configuration or hardware jumper needed.
The details of the ttyS1 port specifications are shown to the side.
Note
: 16C550 compatible
Port Type
: Male
Baud Rate
: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 bps
Data Bits
: 5, 6, 7, 8
Parity
: None, Even, Odd, Mark (Always 1), Space (Always 0)
Stop Bits
: 1, 2
FIFO
: 128 bytes
●
ttyS34 (RS-232)
The ttyS34 port is a 9-pins RS-232 connector. The details of the ttyS34 port specifications are
shown to the side.
Note
: 16C550 compatible
Port Type
: Male
Baud Rate
: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 bps
Data Bits
: 5, 6, 7, 8 Parity: None, Even, Odd, Mark (Always 1), Space (Always 0)
Stop Bits
: 1, 2
FIFO
: 128 bytes