iCoolsport Compact Cool 3 Series, Руководство пользователя

Страница: 25 / 32

Page 25 iCool Compact Series | Owners Manual
iCool Compact machines are very powerful and
capable of removing up to 7,500 watts of heat
from the water. (25,000 BTUs) Depending on
the model.
To remove waste heat from the powerful
heat pump a powerful high flow cooling fan is
installed. The fan is designed to move up to
3000 cubic feet of air per minute. Air flow must
never be blocked by any object.
If the temperature inside the Compact exceeds
70ºC the over heat safety circuit will operate and
shut it down. The screen will give advice as to
when it can be safely restarted. This may occur
in very hot weather, or if the airflow is blocked by
being placed too close to a wall or if an object
such as a bath towel is blocking the air flow.
Never place the back of your iCool machine
closer than 250mm (10 inches) from a wall or
other obstruction that could restrict the flow of
cooling air.
Compact Machines specifically ordered for
countries that have weather conditions below
freezing may have an anti-freeze system
installed.
This function is automatic and will cause the
machine to stop occasionally to melt any build
up of ice.
If your pool has spa jets it is best not to leave
them running because spa jets inject the warm
room air in to the water for a better massage
effect, however this adds all the room heat to the
water and will cause the Compact to run longer
to remove this extra heat. So this just wastes
electricity and will slow the cooling process.
Operation In Very Hot Weather
Operation In Very Cold Weather
Do Not Operate The Spa Jets For
Long Periods
After thawing, set a new temperature no lower
than 8 or 9ºC before restarting to prevent the
tanks freezing again.
If this becomes a problem then adding a little
salt to the water will lower the temperature at
which the water freezes