iCoolsport Compact Cool 3 Series, Руководство пользователя

Страница: 10 / 32

Page 10 iCool Compact Series | Owners Manual
Basic Setup
Step 3: Connecting Electric Power
to your Compact machine and your water Pump
On if power is connected
On if water is flowing correctly
IMPORTANT SAFETY NOTE!
As a safety precaution the power inlet
and outlet sockets are recessed in to the
cabinet and angled upwards at 20º to
prevent splashing or rain from entering.
Take care when inserting.
Also, the combined Main Power Switch
and Electrical Safety Device is recessed
in to the cabinet to protect it from
splashing.
If this device detects any unsafe
electrical leakage it instantly removes all
electric power from both the chiller and
the water pump.
On if water pump is powered on
On if system has detected an error
Turn on MAIN POWER here
Plug the MAIN POWER in here.
You must use the correct voltage as
shown above this socket.
Plug the WATER PUMP in here.
If not using the water pump provided
do not use pumps exceeding 1000
watts.
Make sure that you do not connect your Compact machine to the wrong voltage.
Please check the voltage on the name plate above the power IN socket. It is either a 220 volt model or a 110 volt model.
You must not connect to the wrong voltage or this will cause serious damage.
The Water Pump
must be connected to the special socket on the Compact Machine as shown.
Warning! You can only use the voltage
marked here. Using a different voltage
will cause serious damage.