Page 16
Automatic System Shutdown Timer
You can preset your iCool to shut down at any time up to five hours in the future. This is very convenient
for coaches and specialists who may want to leave the training area early but want to make sure that
the system is not left running needlessly. To set this time, touch the
”Set Shut Down”
button and the
clock digits on the bottom right of the screen will begin to flash as with setting the clock. Use the same up
down and left right arrows to set the number of hours and minutes you wish to elapse before the system
automatically shuts down. The system automatically begins the countdown and will stop when the time
you set reaches zero. The time remaining before shutdown is displayed on the main clock display screen.
As the same arrows are used to set all three time functions, to avoid confusion, a red dot appears next to
be button of the function being set.
To avoid an unintended shut down next time you use your iCool this timer automatically resets to 0:00 at
shutdown. It does not keep the previous setting, so there will only be a shutdown if you reset this timer.
14
You can also display the main clock,
showing the time of day in full screen
mode by touching the “Display Clock in Full
Screen” button.
14:10
14
2:41
Locking Your iCool System to Prevent Tampering
Your iCool has an electronic lock system.
You should keep this a secret known only to authorised
operators.
iCool Systems have attractive user interfaces, this makes them easy to use, but the downside is that
untrained people often like to play with the colourful touchscreens.This can upset all your
settings and even cause an unintended shutdown.
To lock the screen so that no further inputs can be made, touch and hold the
iCool icon on the main run screen for more than 10 seconds (you can only lock
from this main screen).
A picture of a lock will appear.
When ever this lock is visible it is not possible to make any inputs or to change
screens.
To unlock the system and returned to normal, repeat the procedure. Touch and
hold the iCool icon for more than 10 seconds. The lock will disappear and all functions will return to normal
Intelligent power management saves electricity automatically
All TurboCools are fitted with a fully automatic intelligent power management system that manages the dual heat
pumps to minimise electricity use. It senses pool and room temperature and other parameters and provides only
the cooling or heating power that is actually needed at any point and closes down one of the two built in heat pumps
completely when it is not required. This cuts power use by up to half. Compared to other comparable systems it
offers large savings during long hold over periods such as over night or weekends, while still maintaing your set
temperature.
You may notice that the fans change speed and the heat pump compressors start and stop at various times. This
is a normal function of the power management system as it optimises the operation for best performance and
economy.