Page 14
“Back 1”
You can flip forward or backwards from page to page using the BACK button on the
right-hand side of the help screens or you can return to be main help menu page at any time by
touching the HOME button.
“All Stop”
There are several ways to stop the system and close it down.
1. You can stop the cooling system only by touching the
“Stop System”
button, in this case
the pump will continue to run,
2. You can stop to pump at any time by touching the
“Stop pump”
button. Stopping the
pump while the System is running also automatically stops the Cooling (or Heating) System
because it can not run safely without water.
3 .Alternatively you can stop everything by touching the
”All Stop”
.button
If you use the
”All Stop”
button the fans may continue to run for a short time to cool the cabinet.
Display the pool temperature at full screen size.
If you touch the number in the pool temperature window
on the Main Operation Screen for a few seconds the
screen will change to a full-screen display of the pool
temperature. (shown here at right)
This is useful if you wish to monitor the system from a
distance.
The pre-set temperature and the outside temperature
continue to be displayed in smaller windows for your
reference.To return to the main operating screen touch
the
BACK 1
button.
14
10
25
Systems Preferences
Available System Preferences
Touching the
“Home”
button will take you to a screen that will give you access to the
SYSTEMS SETTINGS
that allow you to customise certain settings to your preference.
Optimum settings are automatically selected
so there is normally no need to use this
feature.
Main Cooling Fan Speed
This allows you to set the main cooling fans to either
Normal
or
Quiet
mode. Generally you should always leave it in the
Normal
mode which is fully automatic and allows the system to control the
fan speed to give the very best efficiency.
Temperature Display scale.
This can be set to either Centigrade or Fahrenheit and changes all
of the displays throughout the entire system. The iCool normally
reads in Centigrade as this is the world standard. It can convert the
display to ºF if required, however due to rounding off calculations
between Cº and Fº there may be minor differnces in the Fº display,
however the system always holds the water temperature to within 1ªC.
Sound Level.
The
Sound level
adjusts the sounds made when touching the screen and by the alarms. Normally it should be left
on high to assist with settings and to make sure alarms are heard. There are three settings High, Medium and Low.
A red dot indicates which setting is selected in each of the available settings.
Stop
Stop