iCool LITE, Руководство пользователя, Страница: 7 / 18

07
Owner’s manual for iCool Recovery Systems
Filter pump power outlet on all new models
If you plug the filter pump into any other electric outlet please be sure
that the outlet you use is protected by an electrical safety device.
No person should enter the pool unless an electrical safety device is
provided.
If there is no safety device then you must disconnect the pump before
entering the pool.
iCool filter pumps are double insulated as a normal precaution, but
it is not wise to completely trust this. Nothing is as safe as a proper
electrical safety device called an R.C.D. Residual Current Device. All
iCools are fitted with and R.C.D.
The water hose connections shown below apply to all Compact and Lite models
CONNECT THIS HOSE TO THE TOP OF YOUR POOL
THIS HOSE SENDS THE CHILLED OR HEATED WATER BACK TO YOUR POOL
THIS HOSE COLLECTS WATER FROM YOUR
POOL TO FEED IN THROUGH THE FILTER AND
ON THE ICOOL TO BE CHILLED (OR HEATED*)
THIS HOSE SENDS FILTERED
WATER TO THE ICOOL, TO BE
CHILLED (OR HEATED*)
FROM THE POOL TO THE FILTER PUMP, FROM
THE FILTER PUMP TO THE ICOOL, FROM THE
ICOOL BACK TO THE POOL
*HEATING IS ONLY POSSIBLE WITH THOSE MODELS THAT HAVE THE HEATING FUNCTION
ONCE THE WATER IS FLOWING PLEASE UNSCREW THIS FITTING
A SMALL AMOUNT TO ALLOW TRAPPED AIR TO ESCAPE. WHEN
WATER APPEARS WITH NO BUBBLES SCREW IT TIGHT AGAIN
DIRECTION OF WATER FLOW
CONNECT THIS HOSE TO THE
BOTTOM WATER FITTING OF
YOUR ICOOL
CONNECT THIS HOSE TO THE BOTTOM
OF YOUR POOL
STEP 3
WARNING
Only when your filter pump is connected to the power socket on
your iCool, can your iCool provide proper electric shock protection