iCool LITE, Руководство пользователя, Страница: 11 / 18

11
Owner’s manual for iCool Recovery Systems
FUNCTIONS OF THE TOUCH BUTTONS
SYSTEM SETTINGS
Temperature Settings
When your iCool starts up, you are offered 3
different ways to choose a water temperature
setting. Whichever method you choose it eventually
takes you to the main run screen. If you make no
setting, the system will automatically insert 15°C.
(around 59ºF) In this case you can go directly to the
start pump and start system.
If you want to use your previous setting from
the last session, you can touch the use previous
setting button and the last setting you used will be
automatically inserted into the system. Previous
settings may have been lost if you have removed
the mains power.
If you want to use a different temperature to the
built in presets the most common users make,
you touch the make new settings button and this
will take you to the screen illustrated below, where
you can use the up and down arrows to select
the temperature you require. After you make your
setting touch of the start button to go to the main
screen where you can start both the pump and the
cooling system and where all relevant temperature
information is clearly displayed.
When your iCool starts up, the first screen you will see
offers you a SYSTEM SETTINGS button, OPTIMUM
SETTINGS ARE AUTOMATICALLY SELECTED so
there’s usually no need to use this feature. The three
settings you can change are the fan speed range, the
temperature from degrees Centigrade to Fahrenheit
and the sound level from the screen.
Main Cooling Fan Speed
This allows you to set the main cooling fan to either NORMAL or QUIET
MODE. Generally you should always leave it in the NORMAL mode which
is fully automatic and allows the system to control the fan speed to give
the very best efficiency and fastest cooling.
Quiet Mode
If you are in a very quiet environment you can select QUIET MODE, but
you must be aware that this will reduce the cooling ability of the system,
however it will be quieter overall as the fan will not run higher than 60% of
maximum unless there is a risk of overheating, in which case the safety
system will turn the fan back to high no matter what the setting. The
NORMAL setting is used to give absolute maximum cooling power where
higher fan noise is not a problem. On a normal day this gives about 25%
more cooling than in the QUIET MODE.
Temperature Display Scale
This can be set to either Centigrade or Fahrenheit and this changes all of
the displays throughout the entire system. When you first start the iCool
it will normally start in Centigrade as this is the world standard.
Note: Due to complex decimal calculations between Cº and Fº there
may be minor difference in the true Fº displays. This has no effect on
actual cooling accuracy.
The sound level adjusts the sounds made by touching the screen and by
the alarms. Normally it should be left on high to assist with settings and
to make sure alarms are heard.
A red dot indicates which setting is selected in each of the available
settings.
SYSTEM SETTINGS MAIN SCREEN
USE PREVIOUS SETTING
MAKE NEW SETTINGS
Touch Buttons Screen
Water Temperature Setting Screen
27 ° 10 °