24
If you want to change it, go to the
File
pull down menu and click on
Options
or right click on the BeamWare Project window
in the center of the screen. Either method will open the Options screen shown here.
Click on the
Settings
tab to open the window shown below. Make the change and then click on
OK
to approve the change.
Notice that the Settings window also allows you to change the height of the measuring plane (the
Ear Height
). Until you
are more familiar with the program we suggest you accept the default setting. There are times, however, when you will
want to change the height of the measuring plane. It is set to 1.2 meters (3.94 feet) which is fine for a seated audience, but
not for a standing audience.
The Appearance tab allows you to control the appearance of the main Mapping plot. For now, accept the default settings.
You can experiment with this later.
The Scales tab allows you to change the scales used in the main Mapping window. Many experienced users like to use the
Fixed Range
option under
Scale Level Views
; setting the
Round Up
to 5 and the
Show Range
to 5. You may want to
experiment with this to see which setting you like best.
Owners Manual
