15
14
www.iconico.es
User manual WC3
Water pressure adjustment
Auto function
Auto cleaning sequence
Temperature adjustments
Spray nozzle position adjustment
Energy saver
• Press [+] or [-] button when it is under function of rear cleaning or front cleaning, the
indicator light will be on showing current the water temperature level, adjust the water
pressure by 3 levels.
• The automatic default setting is middle level for water volume, nozzle position, water
temperature, air temperature, seat temperature; is turned off for the massage function.
• Short press [Auto rear cleaning] or [Auto front cleaning] button to start rear or front
cleaning automatically. The user can adjust the water pressure, nozzle position and
temperature level as per requirement, the memory keep the last setting when the user
presses the Auto button, cleaning and drying function is activated automatically.
• The Auto function mode will be off if the user presses other buttons during the
operation and will shift to the pressed function.
• Press [Air temperature] button, the indicator light will light up the displayed air
temperature level, continue to press the [Air temperature] button to adjust the air
temperature. It will be neutral level when the indicator light is off.
Auto rear cleaning
Rear cleaning 40s
Auto front cleaning
Front cleaning 40s
Dry 180s
Front cleaning 20s
Dry 180s
Automatic stop
Massage cleaning 30s
Automatic stop
• Press [ ] or [ ] button when it is under function of rear cleaning or front cleaning, the
indicator light will be on showing the current nozzle position, adjust the nozzle position
by 3 levels.
Keep pressing [Stop] button for more than 3s to enter the energy saving mode, the
indicator light will be off and the energy saving light will be on. Keep pressing [Stop]
button again for more than 3s to exit energy saving mode, the indicator light will be on
and the energy saving light will be off.
Under the energy saving mode, seat temperature is low (level 1) .
Note:
If the seat temperature before energy saving is neutral it will continue as neutral during the
energy saving mode.
• Energy saving mode will be suspended and go to function mode if someone uses the
seat. The seat will start to heat immediately. The energy saving mode will be restored
after the person leaves the seat.
PRESSURE
POSITION
REAR/MOVE
FRONT/MOVE
DRY
Nozzle
STOP
HOLD TO ECO
Rear cleaning 20s
Massage cleaning 30s
Air temperature adjustment:
Water temperature adjustment:
• Press the [Water temperature] button, the indicator light will light up the displayed
water temperature position, continue to press the [Water temperature] button to adjust
the water temperature. The indicator light will be neutral when the indicator light is off.
Note:
when the neutral level is selected, the temperature is 10±2.5°C. When the water temperature
is higher than 10 °C, it will not be heated; when it is lower than 10 °C, it will heated; and the
temperature of the outlet water will be controlled around 10 °C.
- Only for the toilet with auto flush function）
Energy saving:
Remark:
