9
8
www.iconico.es
User manual WC3
CAUTION
2. Grounding instructions
This product should be connected to ground. In the event of an electrical short
circuit, rounding reduces the risk of electric shock by providing an escape wire for the
electricalcurrent. The plug must be connected to an outlet, properly installed and grounded.
DANGER
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire
to either flat-head terminal.
Check with a qualified electrician or serviceman if the grounding wire instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
This product is factory equipped with a specific electric cord and plug to permit connection
to a proper electric circuit. Make sure that the product is connected to an outlet having the
same configuration as the plug.
No adapter should be used with this product. Do not modify the plug provided — if it will not
fit the outlet, have the proper outlet installed by a qualified electrician.
If the product must be reconnected for use on a different type of electric circuit, the
reconnection should be made by qualified service personnel.
- Improper use of the grounding plug can result in a risk of electric shock.
• Do not install or use the product in wet or damp locations such as a steam room.
• Ensure the electrical outlet is positioned where it will not come in contact with water.
• This product is to be used with an electrical system rated at 220V-240V, 50/60Hz. The
circuit must be capable of supporting a minimum of 10A.
• It is recommended to unplug the unit during thunderstorms to prevent electrical damage.
• Do not stand on product, seat or seat cover.
• Do not lean against the seat cover when using the product.
• This product is equipped with a soft-closing seat cover. Do not push the toilet seat closed,
or damage may occur.
• Do not use any caustic chemicals to clean this product.
• Exposure to direct sunlight is not recommended.
• Only use tap water or portable water, otherwise it may cause irritation to the skin or
malfunction.
• Do not connect water supply to a HOT water supply. Make sure inlet water temperature is
between 3~35ºC.
• Do NOT expose the Bidet Seat or Toilet to freezing conditions.
• If the unit will not be used for an extended period of time (over 3 days), it is recommended
to unplug the electrical connection, turn of water supplies, and drain any water present in the
product.
• If the unit is malfunctioning, unplug from electrical connections, and turn OFF water supply.
• The product itself is not equipped with an emergency power circuit breaker, a power circuit
breaker should be connected in series in the power input loop of the same room where the
product is installed before safe use; Otherwise, the accidental failure of this product may
cause bodily injury or property damage.
• If this product is installed without a power cord plug, a switch device capable of
disconnecting the power supply of this product must be installed at the front end of the fixed
wiring.
3. Parts identification
Bumper
Seat
Ceramic toilet
Rear cleaning button
Drying baffle
Spray nozzle
Rear cleaning
Front cleaning
Night light
sensitive window
Front cleaning button
Drying button
Stop
Lid
Left side
Right side
