ICON NordicTrack SpaceSaver SE 7i Скачать руководство пользователя

Страница: 23 / 32

MAINTENANCE

Regular maintenance is important for optimal

performance and to reduce wear. Inspect and

properly tighten all parts each time the elliptical is

used. Replace any worn parts immediately. Use only

manufacturer-supplied parts.

To clean the elliptical, use a damp cloth and a small

amount of mild soap. IMPORTANT: To avoid damage

to the console, keep liquids away from the console

and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If the console does not turn on, make sure that the

power adapter is fully plugged in.

If you are having problems connecting the console

to a wireless network or if you are having problems

with your iFit account or iFit workouts, go to

support.iFit.com.

If a replacement power adapter is needed, call the

telephone number on the cover of this manual.

IMPORTANT: To avoid damaging the console, use

only a manufacturer-supplied regulated power

adapter.

If the console does not boot

up properly, or if the con-

sole freezes and does not

respond, reset the console

to the factory default set-

tings. IMPORTANT: Doing

this will erase all custom settings you have made

to the console. Resetting the console requires two

people. First, unplug the power adapter. Next, locate

the small reset opening (A) on the side or the back of

the console. Using a bent paper clip, press and hold

the reset button inside the opening, and have a second

person plug in the power adapter. Continue holding the

reset button until the console turns on. When the reset

operation is complete, the console will turn off and then

turn back on. If it does not, unplug and then plug in the

power adapter. Once the console turns on, check for

firmware updates (see HOW TO CHANGE CONSOLE

SETTINGS on page 21). Note: It may take a few

minutes for the console to be ready for use.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted. To adjust the reed

switch, first unplug the power adapter.

Next, remove the

four M4 x 16mm

Screws (not shown)

from the Large

Storage Foot (27),

and then remove

the Large Storage

Foot. Then, remove

the two M4 x 16mm

Screws (not shown)

from the Top Shield

(37), and then use a

standard screwdriver to pry the Top Shield upward off

the elliptical.

Next, look into the access opening and locate the

Reed Switch (58). Rotate the Pulley (66) until a

Magnet (41) is aligned with the Reed Switch.

MAINTENANCE AND TROUBLESHOOTING

Содержание NordicTrack SpaceSaver SE 7i

































Результаты поиска

Содержание NordicTrack SpaceSaver SE 7i

Отзывы:

Похожие инструкции для NordicTrack SpaceSaver SE 7i

Бренды по названию

Популярные бренды

ICON NordicTrack SpaceSaver SE 7i, Руководство пользователя

Результаты поиска

Содержание NordicTrack SpaceSaver SE 7i

Отзывы:

Похожие инструкции для NordicTrack SpaceSaver SE 7i

Бренды по названию

Популярные бренды