ICON DPC1, Инструкция по установке и эксплуатации

Страница: 41 / 44

BIA-DPC1 rev 4 Page 41
6.1 Basic function.
Slave Controller (SC) with communication interface can realize long distance monitoring. In the control room,
users can realize all the functions of the master control panel through the SC, except parameter calibration
and adjusting.
6.2 Special application.
As adopting communication interface, the wire communication distance is less than 1200 metres. For those
installation environments which require a longer distance communication, i.e., mine, water tower, across
railway road and bridge etc., users can adopt RS485 extender, wireless communication or GSM. Please contact
the manufacturer for more information.
6.3 Technical parameters.
The following chart shows main technical parameters of communication between the control panel and the
slave controller.
Main technical data
Physical interface RS485 Bus Interface: asynchronous semi duplex
Data format 1 start bit, 8 data bit, 1 stop bit, no verify
1 start bit, 8 data bit, 2 stop bit, no verify
Default: 1 start bit, 8 data bit, 1 stop bit, no verify
Baud rate 1200,2400,4800,9600 bps (default 9600bps)
Communication address Setting range of controller address: 1-126
127: broadcast address, host computer broadcasting,
slave machine response forbidden
Protocol type MODBUS protocol (RTU)
Rated input voltage for SC AC 240V/50Hz, single phase
Main installation data
Wire communication distance 1200 metres max by shield twisted pair cable (STP)
for RS485 & CAN
5000 metres max by STP and RS485 extender
STP STP-120U one pair 20AWG for RS485 & CAN
RS485 extender 5000 metres (9600bps)