BIA-DPC1 rev 4
Page 38
Erasing former parameter.
When pump is reinstalled after maintenance or a new pump is installed, user must
erase the former calibration and a new calibration must be done.
Erasing the parameter calibration.
Press the
MODE
key to switch to manual state. If the control panel is locked press
MODE
and
STORE
keys at
the same time to unlock and go into manual mode. Make sure the pump is not running and LCD is displaying:
Press the
A STOP
key for 30 seconds
; the control panel makes a “beep” sound, and the control panel recovers
the default factory setting and the LCD displays:
with Pump No Calibration
flashing.
Repeat for pump B by using the
B STOP
key for 30 seconds.
5.2 Switching to AUTO mode.
To switch between MANUAL and AUTO mode press
MODE
. AUTO mode automatically locks control panel.
Under auto state the control panel will run or stop the pump according to the signal from the liquid level probe
or float switch.
Note:
under auto state, if the pump is running and user wants to stop the pump, press the
MODE
key to switch
to manual state and the pump stops.
Note:
under auto state, if the input power is cut off and the recovers, the control panel will enter operating
state after 10 seconds countdown
Note:
no matter if the control panels is under auto or manual state, if the input power is cut of and recovers
again, the control panel will resume its operation in the same state as before the power being cut off.
5.3 Switching to MANUAL mode.
To switch between AUTO and MANUAL model press
MODE
and
STORE
keys at the same time to unlock and go
into MANUAL mode.
Press the
START
key to start the pump and the
STOP
to stop the pump.
5.4 Alarm Test and Mute.
Under MANUAL mode and pump/s not operating press
STORE
for 3 seconds to test the alarm.
At any time press
ASTOP
to mute the alarm.
5.5 Pump Protection
Содержание DPC1
