11
11
11. Insert the wire (E) on the Reed Switch (59) into
the Clip (64) on the left side of the Frame (1).
Next, insert the Reed Switch (59) into the Clamp
(30) on the Frame (1).
Then, rotate the Flywheel (37) so that the
Magnet (20) is facing the Reed Switch (59).
See the inset drawing.
Move the Reed Switch
(59) so that it is 1/2" (1–2 cm) away from the
Magnet (20).
64
E
37
1
59 20
30 20
59
12
12. Orient the Tablet Holder (73) as shown, and
press it onto the Handlebar (7) in the location
shown. Center the Tablet Holder on the
Handlebar and rotate it forward or backward to
the desired position.
While a second person holds the Tablet Holder
(73) in place, attach the Tablet Holder with
the Clamp Bracket (74) and two M6 x 40mm
Screws (75) as shown in the inset drawing.
74
73
7
75
74
75
73
13.
After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Extra parts may be included. Place a mat under the exercise bike to protect the floor.