Icom VE-PG4 Скачать руководство пользователя страница 93

Страница: 93 / 122

MAINTENANCE

5-10

Automatic Restoring from a USB flash drive

You can load the VE-PG4’s settings or update firmware, that are saved on a USB flash drive (user supplied).

This is useful for cloning the settings to 2 or more VE-PG4s.

■

Using a USB flash drive

Before inserting the USB flash drive:

•

Backup the current setting of the RoIP Gateway and the contents in the USB flash drive.

•

Confirm the [USB] indicator is not lit, to prevent data corruption.

When inserting or removing the USB flash drive:

•

Either one of the USB slots accepts the USB flash drive, but insert only one USB flash drive at a time.

•

Insert the USB flash drive firmly and securely, until the [USB] indicator lights green.

•

NEVER remove the USB flash drive or turn OFF the RoIP Gateway while transferring data (the [MSG]

indicator blinks while transmitting.) It will cause data corruption, or damage the USB flash drive.

•

After the firmware update is completed, check the firmware version on the setting screen to verify that the

update was correctly done.

NOTE for updating the settings or the firmware:

•

The firmware or the setting file will not be updated when:

•

The source data in the USB flash drive is as same as the current settings or firmware.

•The source data is damaged.

•The source data is not for the VE-PG4.

•

When both the firmware and settings for the VE-PG4 are saved in the USB flash drive, the firmware will be

updated after the settings data is loaded.

•

When restoring the setting data from a USB flash drive to the RoIP Gateway, its original settings is

automatically saved as “bakdata.sav” into the USB flash drive, as a backup.

■

Usable USB flash drive specifications

•Interface:

USB 3.0 / 2.0 / 1.1

•

Device:

USB flash drive (USB Mass Storage Class)

•

File format:

FAT16/FAT32 (exFAT and NTFS are not supported)

A USB flash drive such as one with biometric authentication, or one with password protection is not supported.

Self-power supply may be required, depending on the device’s current consumption.

Содержание VE-PG4



























































































































Результаты поиска

Содержание VE-PG4

Отзывы:

Похожие инструкции для VE-PG4

Бренды по названию

Популярные бренды

Icom VE-PG4, Руководство по установке

Результаты поиска

Содержание VE-PG4

Отзывы:

Похожие инструкции для VE-PG4

Бренды по названию

Популярные бренды