3
WIRELESS LAN TRANSCEIVERS
3-7
Configuring the wireless LAN transceiver system
■
The Transceiver Settings
Set up each registered transceiver.
L
After completing the settings on this screen, restart the IP100H to apply them.
1
Open the Transceiver Settings screen.
(Transceiver Controller > Transceiver Settings > Transceiver Settings)
2
In [Transceiver Settings], select the Unit ID that you want to set up, and then enter the required settings.
To call to an IP telephone, enable “Clear Down during Telephone Call” or
assign ”Clear Down” to the “Option key.”
You can hang up the call by pushing [OPTION].
L
Only for the individual call from an IP
telephone or a call from the IP100H to an IP
telephone.
押す
Push [OPTION]
w
Enter
q
Select
3
Click <Apply>.
Click
4
Confirm the setting in “Transceiver Setting List.”
Confirm
Transceiver Controller > Transceiver Settings > Transceiver Settings
