Icom SL-1105 Скачать руководство пользователя страница 6

Страница: 6 / 66

For Canada only

Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.

Be sure to read these precautions in order to

operate the LAN card safely.

These precautions are intended to ensure that the LAN card is operated safely and

correctly. Follow these instructions to avoid property damage and prevent personal
injury to yourself (user) or others in the vicinity.

Before reading the rest of this manual, read and understand the precautions listed

under "Warning" and "Caution" below.

This manual includes precautions regarding both the SL-1105 and the entire

computer system with which the SL-1105 is being used.

After reading this manual, store it in a convenient place for future review.

WARNING

Failure to observe the precautions listed here could result in serious
or fatal injury to the user or those near the user.

Be sure to turn off the power to the computer and the peripheral equipment before

inserting or removing the LAN card into or from the card slot.
Otherwise fire, electric shock, or equipment failure may result.

Keep the LAN card out of the reach of children when inserting, removing, or storing

the LAN card.
Otherwise injury or electric shock may result.

Do not insert wire or other metal parts into the connector portion of the LAN card.

Otherwise fire, electric shock, or equipment failure may result.

Do not disassemble or modify the LAN card or attempt to repair it yourself.

Otherwise fire, electric shock, or equipment failure may result.

Do not allow the LAN card to become wet.

Otherwise fire, electric shock, or equipment failure may result.

Содержание SL-1105



































































Результаты поиска

Содержание SL-1105

Отзывы:

Похожие инструкции для SL-1105

Бренды по названию

Популярные бренды

Icom SL-1105, Инструкция по эксплуатации

Результаты поиска

Содержание SL-1105

Отзывы:

Похожие инструкции для SL-1105

Бренды по названию

Популярные бренды