Icom MR-1220 Series Скачать руководство пользователя

Страница: 30 / 80

AIS RECEIVER

AIS description

AIS operation

Course and speed vectors

The vector indicates the target’s predicted, true or

relative course and speed.

•

The vector time may change, depending on the

setting in the “Vector Time” item of the Target menu

(p. 39).

•

The tip of the vector shows the target’s predicted

position after the time selected in the “Vector Time”

item of the Target menu

(p.39).

Speed Over Ground (SOG) and

Course Over Ground (COG) vector

Rate of turn (ROT)

Heading line

If the heading data is not received,

The line indicates the vessel’s COG.

Plots (AIS)

The plot displays the activated target, SAR, SART,

MOB, or EPIRB’s past positions as 5 dots, during

each specified tracking interval.

The target track interval may change, depending on the

setting in the “Track Interval” item of the Target menu.

(p. 39)

Plots

Status

Going straight

urning right

Decelerating (dots are closer

together behind the target)

Accelerating (dots are father apart

behind the target)

Displaying AIS target details

You can also display the more details on an AIS target

from a context menu.

1. Move the cursor onto an AIS target.

•

The target is highlighted.

2. Hold down [ENTER]/[

] for 1 second.

•

The context menu is displayed.

3. Select “Display Details,” and then push [ENTER]/

[

•

The detailed AIS information is displayed in the

window.

Push [CLEAR]/[

] to close the window.

TIP:

You can display the AIS details by moving the

cursor to in the Information box and pushing

[ENTER]/[

Received AIS list

The list of received AIS is in the AIS List menu.

The targets are displayed with their MMSI numbers, or

names of the ships, if entered.

[MENU]/[

] >

AIS List

TIP:

You can enter the selected target in the list by

holding down [ENTER]/[

] for 1 second and select

“Add to Favorite”.

Содержание MR-1220 Series

















































































Результаты поиска

Содержание MR-1220 Series

Отзывы:

Похожие инструкции для MR-1220 Series

Бренды по названию

Популярные бренды

Icom MR-1220 Series, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1220 Series

Отзывы:

Похожие инструкции для MR-1220 Series

Бренды по названию

Популярные бренды