Icom MR-1220 Series Скачать руководство пользователя страница 62

Страница: 62 / 80

MAinTenAnCe

Settings for a maintenance

Adjusting the sweep timing

The system cable length affects the sweep timing.

if a straight target is displayed as a curved echo,

adjust the “Timing Adjust” setting in the initial menu

appropriate for the cable length.

1. Select the Timing Adjust setting the initial menu.

[MenU]/[

] > initial >

Timing Adjust

Push [◄] or [►] to adjust the timing until the echo

is displayed as straight.

Too low

Appropriate

Too high

(narrowed)

(Widened)

Setting the selectable display ranges

The selectable display ranges can be customized.

if you turn OFF a range, it will be skipped and not

selectable when pushing the RAnGe/ [+] or [–] key.

1. Select the “effective Range Ring” setting in the

initial Menu.

[MenU]/[

] > initial >

Effective Range Ring

Push [▲] or [▼] to select a range, and then push

[◄] or [►] to turn the range OFF or ON.

3. Push [enTeR]/[

] to apply the settings.

Saving or loading the settings

The radar can save three different settings for different

operators or different situations, and immediately

change from one to another.

You can save or load the settings other than the initial

menu.

1. Confirm the radar is in the Standby mode, if

necessary, push [TX (SAVe)]/[

] to enter

the Standby mode.

2. Select either of the “Save setting (1 ~ 3)” that you

want to save the setting to in the initial menu.

When you load the saved settings, select from “Load

Setting (1 ~ 3).”

[MenU]/[

] > initial >

Save Settings (1 ~ 3)

[MenU]/[

] > initial >

Load Settings (1 ~ 3)

The setting number displayed in bold face has

already been saved.

3. Push [enTeR]/[

• <OK> and <Cancel> are displayed.

Push [◄] to select <OK>, and then push [ENTER]/

[

] to save or load the settings.

Содержание MR-1220 Series

















































































Результаты поиска

Содержание MR-1220 Series

Отзывы:

Бренды по названию

Популярные бренды

Icom MR-1220 Series, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1220 Series

Отзывы:

Бренды по названию

Популярные бренды