Icom MR-1220 Series Скачать руководство пользователя

Страница: 3 / 80

INTRODUCTION

Icom is not responsible for the destruction, damage

to, or performance of any Icom or non- Icom

equipment, if the malfunction is because of:

•

Force majeure, including, but not limited to, fires,

earthquakes, storms, floods, lightning, other

natural disasters, disturbances, riots, war, or

radioactive contamination.

• The use of Icom radars with any equipment that is

not manufactured or approved by Icom.

■

FEATURES

The MR-1220 series

marine

radars

are designed

especially for fishing boats. They have powerful

transmitting power, a

12.1-inch Color LCD display and

many other advanced features.

The Simplified ARPA (Automatic Radar Plotting

Aids) function tracks up to 30 targets

(including up to 20 automatic acquiring targets)

The Plot function tracks your route on the radar

echo

Built-in 3D Bird’s-eye view

The DSC (Digital Selective Calling) information

function shows received DSC Messages with Icons

An External Alarm can be connected to warn of

danger in a noisy environment

Built-in AIS (Automatic Identification System)

overlay function

The Multiple language display

A Sub display is connectable

An optional UX-234

video

output

unit

is required.

Icom, Icom Inc. and the Icom logo are registered

trademarks

of Icom Incorporated (Japan) in Japan,

the United States,

the United Kingdom, Germany,

France, Spain, Russia,

Australia, New Zealand, and/

or other countries.

All other products or brands are registered trademarks or

trademarks of their respective holders.

This marine radar is supplemental aids

to navigation and is not intended to be

a substitute for accurate and current

nautical charts.

■

EXPLICIT DEFINITIONS

WORD

DEFINITION

DANGER!

Personal death, serious injury or an

explosion may occur.

WARNING!

Personal injury, fire hazard, or electric

shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only.

No risk of personal injury, fire or

electric shock.

■

RECOMMENDATION

CLEAN THE DISPLAY UNIT THOROUGHLY

with

a soft, damp (fresh water) cloth, then dry it before

operating.

Otherwise, the display unit’s keys, switches may

become unusable, due to salt crystallization.

The connectors on the rear panel meet IPX4

requirements while connecting to the scanner unit.

NOTE:

If the display unit’s splash resistance appears

defective, carefully clean it with a soft, damp (fresh

water) cloth, then dry it before operating.

The display unit may lose its splash resistance if the

case, or connectors are cracked or broken, or the

display unit has been dropped. Contact your Icom

distributor or your dealer for advice.

■

TO DETECT SART SIGNALS

SART signals may no be detected and displayed on

the screen, depending on the SEA, RAIN, and IR

settings.

Make the settings below to detect a SART signal on

the screen.

1. Set the screen range to between 6NM and 12

NM with Range (

) [+] or [–].

2. Set the GAIN control (

GAIN

) as high as

possible.

Minimize the SEA control (

SEA

Minimize the RAIN control (

RAIN

5. Turn OFF the Interference Reduction (IR)

function.

6. Turn OFF the Echo stretch (ES) function.

Содержание MR-1220 Series

















































































Результаты поиска

Содержание MR-1220 Series

Отзывы:

Похожие инструкции для MR-1220 Series

Бренды по названию

Популярные бренды

Icom MR-1220 Series, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1220 Series

Отзывы:

Похожие инструкции для MR-1220 Series

Бренды по названию

Популярные бренды