Icom MR-1220 Series Скачать руководство пользователя страница 48

Страница: 48 / 80

MENU SCREEN

Menu items

■

DSC List

Displays the received DSC logs.

Select an ID from the list to display the details.

You can select the target by holding down

[ENTER]/[

] for 1 second in the list, and then

pushing [ENTER]/[

] again.

■

AIS List

Displays the received AIS information of up to 100

targets. The target that you have added to the

Favorite, Selected, Lost, ID Blocking, and Dangerous

targets are displayed with each icons.

Select an ID from the list, hold down [ENTER]/

[

] and select “Select” or “Add to Favorite,” and

then push [ENTER]/[

] apply.

■

Own AIS

Displays the AIS information of your vessel.

■

Status

Displays the current status of the principal settings

and input information.

■

Port Monitor

Displays the current status of each Input/Output ports.

The status is continuously updated. Push [ENTER]/

[

] to pause the screen, and push [ENTER]/[

]

again to resume.

■

Scanner Monitor

Displays the scanner status.

If reception fails, the status is displayed in orange text.

■

Safety Message

Lists the AIS safety messages.

Содержание MR-1220 Series

















































































Результаты поиска

Содержание MR-1220 Series

Отзывы:

Бренды по названию

Популярные бренды

Icom MR-1220 Series, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1220 Series

Отзывы:

Бренды по названию

Популярные бренды