Icom MR-1200RII Скачать руководство пользователя страница 45

Страница: 45 / 56

MAINTENANCE

Continued, reliable operation of the radar depends on how you care for it. The simple maintenance tips that follow
can help you save time and money, and avoid premature equipment failure.

■

Periodic maintenance

WARNING!

BE SURE

[POWER]/[

]

OFF

before performing any maintenance.

Keep the equipment as clean as possible.

• Use a soft cloth to remove dirt, dust and water.

Check all hardware for loose screws, bolts, etc.

Check cables and terminal connections.

■

Scanner unit maintenance

WARNING!

BE SURE

[POWER]/[

]

OFF

whenever you are working with the scanner

unit.

Cleaning

Wipe the surface of the scanner with a clean soft
cloth.

•

DO NOT

use harsh solvents such as benzine or alco-

hol.

Check that there is no dirt or caked-on salt.

• A heavy deposit of dirt or caked-on salt on the painted

surface of the upper scanner unit will cause a consider-
able drop in radar performance.

Check for cracks or deterioration of the rubber pack-
ing and replace it if necessary.

Painting

(MR-1200TII/TIII)

To prevent the corrosion, paint the surface of the

scanner body (except the antenna unit) twice a year
or more.

Mounting

Check the mounting bolts of the scanner unit and

tighten if necessary.

■

Display unit maintenance

WARNING!

BE SURE

the power is

OFF

be-

fore working on the radar.

Cleaning

Dirt on the LCD will, in time, leave a film of contami-
nates which tend to dim the picture.

Wipe the surface of the display unit with a clean soft
cloth.

•

DO NOT

use strong solvents such as benzene or alco-

hol.

If the picture is still dim, clean the LCD screen.

■

Options

• OPC-1077A SYSTEM CABLE

(for only MR-1200RII)

Allows you to install the display unit and scanner up to 20 m (65.6 ft) apart.

• OPC-1078A SYSTEM CABLE

Allows you to install the display unit and scanner up to 30 m (98.4 ft) apart.

Содержание MR-1200RII

























































Результаты поиска

Содержание MR-1200RII

Отзывы:

Похожие инструкции для MR-1200RII

Бренды по названию

Популярные бренды

Icom MR-1200RII, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1200RII

Отзывы:

Похожие инструкции для MR-1200RII

Бренды по названию

Популярные бренды