i
FOREWORD
Thank you for purchasing Icom’s
MXP-5000
marine
plotter
and
MXD-5000
display
unit
.
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY
before attempting to operate the Ma-
rine Commander.
SAVE THIS INSTRUCTION MANUAL.
This
manual contains important safety and operating in-
structions for the MXP-5000 and MXD-5000.
EXPLICIT DEFINITIONS
WORD
DEFINITION
R
DANGER!
Personal death, serious injury or an explo-
sion may occur.
R
WARNING!
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
SUPPLIED ACCESSORIES
Qty.
MXP-5000 (MAIN UNIT)
• DC power cable .......................................................... 1
• Ferrite EMI Filter ......................................................... 1
• OPC-1897 (Connection cable: D-SUB 25 pin) ............ 1
• Spring washers (M5) ................................................ 12
• Flat washers (M5) .................................................... 12
• Nuts (M5) ................................................................... 6
• Bolts (M5
×
30 mm) ...................................................... 6
• Fuse (FGB 7.5 A for a 24 V power source) ................ 1
• Spare fuse (FGB 15 A for a 12 V power source) ........ 1
MXD-5000 (DISPLAY UNIT)
• Front cover ................................................................. 1
• Mounting bracket kit .............................................. 1 set
- Mounting bracket ...................................................... 1
- Knob bolts ................................................................ 2
- Hex head bolts (M6×30 mm) .................................... 5
- Flat washers (M6) .................................................. 10
- Spring washers (M6) .............................................. 10
- Nuts (M6) ................................................................. 5
• Mounting bolt (M6×35 mm) ........................................ 4
• Flat washers for wall mounting (M6) .......................... 4
• Spring washers for wall mounting (M6) ...................... 4
• Nuts for wall mounting (M6) ....................................... 4
• Cap ............................................................................. 4
EX-3187 (DISPLAY EXTENSION UNIT)
• Self-tapping screw (A0 4×20 mm) .............................. 2
• Flat washers (M4) ...................................................... 2
• Spring washers (M4) .................................................. 2
FCC INFORMATION
• FOR CLASS A UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
Icom, Icom Inc. and the Icom logo are registered trademarks of
Icom Incorporated (Japan) in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other countries.
MarineCommander and MarineCommander logo are trademarks of
Icom Incorporated.
C-MAP is a trademark of Jeppesen.
All other products or brands are registered trademarks or trade-
marks of their respective holders.
CAUTION: Changes or modifications to these
equipment, not expressly approved by Icom Inc.,
could void your authority to operate these equipment
under FCC regulations.
For Users in California (U.S.A.)
The MXP-5000 uses a Coin Lithium Battery which
contains Perchlorate Material—special handling may
apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate
