3
USING THE CELLULAR MODE
3-3
Basic operation (Continued)
D
Selecting a call-to party
1� Push [Address] to display the Address book�
L
The Address book is displayed�
2� Push [Address] several times to toggle the call type�
L
The selectable call type may differ, depending on a presetting.
3�
Rotate Rotary Selector or push [▲] or [▼] to select a call-to party.
D
Receiving and transmitting
Receiving:
z
When a Call is received, the Status indicator lights green�
Transmitting:
z
While holding down [PTT], speak at your normal voice level�
L
The Status indicator lights red while [PTT] is pushed�
Talk while receiving a call:
z
While receiving a call, push [PTT] to talk in the Full-Duplex mode* like a telephone
call�
L
In the Full-Duplex mode, the Status indicator lights yellow�
* Usability depends on a presetting� Ask your dealer for details�
IMPORTANT:
To maximize the readability of your signal:
1� After pushing [PTT], pause briefly before you start speaking�
2� Hold the microphone 5 ~ 10 cm (2 ~ 4 inches) from your mouth, then speak at
your normal voice level�
About the call type:
•All call:
Transmit to all of the transceivers that belong to the network�
•Group call:
Transmit to the transceivers that belong to the same group�
•Talkgroup call:
Transmit to the transceivers that belong to the same
Talkgroup�
•Individual call:
Transmit to an individual transceiver�
•Telephone call:
Transmit to an IP phone�*
*Transmittable, depending on a presetting�
About the Time-out Timer:
If continuous transmission exceeds the preset Time-Out Timer time, the transmission
is cut off. Release [PTT], and then hold down again to resume talking.