![background image](http://html2.mh-extra.com/html/icom/ip501m/ip501m_operating-manual_3643233006.webp)
1
BeFORe uSIng
1-4
Rear panel connection
5
LAN CABLE …………………
Connect the network devices such as a switch.
CAUTION: DO NOT
connect other than network devices, such as
microphone. This could damage the transceiver
.
6
GPS ANTENNA CONNECTOR
Connect the supplied gPS antenna.
NOTE:
Be sure the gPS antenna is positioned where the gPS
antenna has a clear view to receive signal from satellites, and fi xed
using the supplied double-sided adhesive pad.
7
DC POWER CONNECTOR
Connect to a 12 V or 24 V DC battery.
Pay attention to polarities. Red line:
+
, Black line:
_
CAUTION: DO NOT
reverse the DC power cable polarity when
connecting to a power source. This could damage the transceiver.
Black
Red
Fuse holders
NOTE:
use the terminals as shown
below for the cable connections.
Crimp
Solder
12 V or 24 V Battery
R
WARNING! NEVER
remove the
fuse holders from the DC power
cable.
TIP:
After connecting the LTe Antennas
and gPS Antenna, wrap the connectors
with rubber vulcanizing tape to help in
waterproofi ng.
1
2 3
4
5
6
7
1
Optional speaker